Michael Lawrie¶
Hardware and manufacturing¶
I design mechanical, optical and machine-vision systems, from laser sensors to automated factory machines.
an x-ray imager simulation
and image analysis]:::hardware --> S[Laser triangulation sensors:
the sole opto-mechanical
design engineer]:::hardware --> E[EMCORE: quartz sensor
automation, managed
a team of engineers]:::hardware --> A[iPhone final assembly,
test and pack: I led the
line architecture]:::hardware --> I[A machine-vision startup,
co-founded and ran
as CEO]:::hardware
diagnostics: an x-ray
imager simulation and
image analysis]:::hardware --> S[Laser triangulation
sensors: the sole opto-
mechanical design
engineer]:::hardware --> E[EMCORE: quartz sensor
automation, managed
a team of engineers]:::hardware --> A[iPhone final assembly,
test and pack: I led the
line architecture]:::hardware --> I[A machine-vision
startup, co-founded and
ran as CEO]:::hardware
-
Scaling iPhone automation across countries
Saved about $60M in CapEx with a machine that places a shim behind each button clip so tactility stays within spec on every button. This is CapEx saved against Apple's budgeted equipment spend.
Saved about $55M in CapEx with the flex-circuit threading machine, on the same basis.
At Apple I led the definition of a standardized, fully linked line architecture for FATPFinal assembly, test and pack. The last stage of building a product, where the finished parts are put together, tested and packed to ship. Glossary, from conveyors, pallets, and datums to robot mounting, controls and motion, software architecture, control and electrical cabinets, and fan filter units, along with the robot and line bring-up standards that let the same machines be brought up with manufacturing partners in China and India.
Role: Lead iPhone Advanced Manufacturing Engineer, FATP, Dec 2021 to Jan 2025 · Skills: Robotics, machine vision, metrology, line bring-up, PFMEAProcess failure mode and effects analysis. A step-by-step review of a manufacturing process that asks how each step could fail, what that would cause and how it would be caught. Glossary and SPCStatistical process control. Tracking measurements from a running process on control charts so drift shows up before parts go out of spec. Glossary
Across my career I have led $500M+ of automation equipment and retrofits, including 4 iPhone launches at above 99.5% yieldThe share of the units a line builds that come out good. Glossary, with each machine held to its price target.
The flex-circuit threading machine was a first of its kind: it threads a thin flex circuit through a narrow bore. Few people thought it was possible. I led the process development with the system-integration partners and contract manufacturersA company that builds a product in its own factories for the brand that designed it. Glossary. It worked on the first build, and other lines of business later adopted the process.
Hit a ±50 µm surface spec across a new button with a UV-laser machine that welded a clip onto button pistons.
Coordinated over 275 unique machine-related processes for New Product Introduction (NPINew Product Introduction. The stage where a new product's design is built for the first time and brought up to full production. Glossary) builds as team lead of 4. Every new line was matched to a qualified golden lineA production line that has been proven to meet spec, kept as the reference that a new line is matched against before it is allowed to run production. Glossary before it ran production.
-
Scaling quartz sensor production for aerospace and defense
At EMCORE I managed a team of 3 engineers and led process redesign and automation of quartz MEMS accelerometers and gyroscopes under ITAR. Compared with the previous processes, production scaled up to 10x and yield rose 30%.
Role: Manufacturing Automation Manager, Mar 2021 to Nov 2021; Sr. Automation Engineer, Jul 2020 to Mar 2021
Came up with and led R&D on laser milling of quartz, saving $2M annually in operator costs and yield recovery. Identified fiber-optic gyroscope coil winding as a major cost and bottleneck, then developed and automated the process.
-
Designing vision-based laser triangulation sensors
As the sole opto-mechanical design engineer at Starrett-Bytewise I owned the full product life cycle of vision-based laser triangulation sensors and released 2 new lines of high (8000 Hz) and low (under 300 Hz) speed sensors, one high speed and one low speed, that are 25% more accurate than the previous generation.
Role: Mechanical Design Engineer, 2018 to 2020 · Skills: Python and a CAD API; kinematic-coupling mounting; sub-micron optical shift detection
Cut sensor design time by about 75% by writing software that automates sensor design and assembly through Python and a CAD API.
-
X-ray imager simulation for laser-fusion experiments
As a research assistant at the University of Rochester's Laboratory for Laser Energetics I developed an x-ray imager simulation and MATLAB image-analysis software for laser-fusion implosion experiments, which made opto-mechanical design iterations 2x faster.
Role: Research Assistant, 2016 to 2018 · Skills: MATLAB
Co-author of the 2018 Review of Scientific Instruments paper on the diagnostic. Read the paper
-
Checking simulation against real hardware
At Industrial Dynamics I co-built a machine-vision simulation product on NVIDIA Omniverse and ran the company as CEO. It cut vision-system design from 36 days to 1.5 days per project, measured with our channel partner. I built an optical test bench with ±5 µm part-positioning repeatability, so we could check simulated images against real cameras, lenses and lighting. I built the sim-to-real validation pipeline: telecentric and conventional calibration, registration, a photometry and MTF model, GigE Vision capture, and packet tooling. We ran 30+ customer evaluations, including 10 OEMOriginal equipment manufacturer. A company that makes a product or machine and sells it under its own name, often with parts or systems bought from others. Glossary and system-integrator pilots, and won 4 paid design projects in the first 6 months. A top-10 Tier-1 changed its camera and lighting plan across 80 plants based on our simulation, a top-5 Tier-1 asked for a license, and 2 Tier-1s scoped writing our simulation into machine specs. Customers ran the simulation in the browser: we streamed NVIDIA Omniverse over WebRTC from AWS and Azure. I ran our pre-seed raise against a $2M target through Alchemist Accelerator class 41 and its Demo Day.
Role: Co-founder and CEO, Jan 2025 to Jul 2026.
-
Leading people
At Apple I helped hire for my team. On builds I directed hundreds of people across contract manufacturers and vendors: contract manufacturers on factory layout, input routing, and build coordination, and vendors on new machine design, retrofit kits, SOPs, and delivery acceptance criteria. I worked with contract manufacturer and vendor leadership in China to bring the right engineers onto machine-design and manufacturing problems, and I ran engineering builds there, on site about 90 days a year. At EMCORE I managed a team of 3 engineers, including hiring and performance reviews. I co-founded Industrial Dynamics and ran it as CEO.
Results
- Cut vision-system design from 36 days to 1.5 days per project (measured with our channel partner) with the Industrial Dynamics Vision Studio.
- Designed and built an optical test bench with ±5 µm part-positioning repeatability: how repeatably I can load and position a part relative to the camera.
Tools and methods
Tools: SolidWorks, NX, Ansys, GD&TGeometric dimensioning and tolerancing. The drawing language that says how far each feature of a part may vary and still fit and work. Glossary, FEAFinite element analysis. A simulation that splits a part into many small pieces to see how it bends, heats up or vibrates under load. Glossary, CFDComputational fluid dynamics. A simulation of how air or liquid flows through or around a design, used to check cooling and airflow before anything is built. Glossary; Python, C++, MATLAB; LoRA fine-tuning; KUKA and Epson robots; PLCs.
Toolkit for high-volume electronics manufacturing: PFMEA, control plans, SPC, gauge R&RGauge repeatability and reproducibility. A test of how much of the variation in a set of measurements comes from the measuring system itself, the gauge and the people using it, rather than from the parts. Glossary, DFM/DFADesign for manufacturing and design for assembly. Shaping a part, and the way parts go together, so it is easy to make and to assemble the same way every time. Glossary and 8DEight disciplines. A structured method for solving a quality problem step by step: contain it, find the root cause, fix it and stop it from coming back. Glossary; pick-and-place, press-fit, epoxy dispensing, UV cure, plasma cleaning, laser welding, hot-bar soldering, and camera-module install with active alignment.
BS Mechanical Engineering, University of Rochester, 2018.
Last reviewed Oct 29, 2026